Call +82-31-1577 - 8898

Model CODN
Use Removal of VOCs and stink
Filter type Pre-filter, CFM filter, Carbon filter
Filter cleaning method Filter replacing

Introduction

The CODN-Series VOCs and stink collector is to remove VOCs and stink
from chemical, printing and painting process.


CODN-50-정면

Features

  • Multi-step filter design
    Step 1, Pre-filter: Large size dust is collected by polyester pre-filter.
    Step 2. CFM filter : Small size particles and dust mixed with water or oil are filtered
    by CFM filter made of glass fiber.
    Step 3. Carbon filter: VOCs are removed by adsorption of activated carbon.

ETC.

  • 01

    Caster (Fixed after installation)

  • 02

    Available for changing the side of inlet

※ It is not suitable for highly concentrated VOCs.

Specification

Model Air Flow
(CMM)
Pressure
(mmAq)
Motor
(Kw)
Dimension Amount of
activated carbon
(Kg)
A B C D
CODN-50 7 230 0.75 460 500 1,100 Ø100 20
CODN-100 12 200 0.75 550 520 1,270 Ø125 20
CODN-200 25 230 1.5 670 650 1,630 Ø150 38
CODN-300 40 230 2.2 780 760 1,750 Ø200 60
CODN-500 60 230 3.7 800 750 1,970 Ø250 66
CODN-750 80 250 5.5 1,600 800 1,840 Ø300 115
CODN-1000 100 250 7.5 1,700 800 2,050 Ø350 130

※Without the height of caster



Option

  • Flexible conduit

  • Available for changing the power specification
    : 3 phase 220V/ 380V/ 440V, single phase 220V (below 3HP)

※ Need separate inquiry for environmental licensing

The Right service of Clean air Tech begins

with hope to contribute to the neighbors and society through the clean environment.
Our passion does not end by the accurate and detailed design, precise production, excellent quality and best performance through the installation and construction.
It is the spirit of fulfilling responsibility to dust collectors operated all around industrial sites as the air environment specialized company.
We, the whole member of Clean air tech believe that this is customer-centric right service.

CAT RIGHT SERVICE

  • Diagnosing service for dust collector performance and efficiency
    CAT provides right use, performance maintenance, diagnosing service for every dust collecting facilities.
  • Round visiting check-up
    We believe that all dust collectors should contribute to the improvement of working condition.
  • Repairing and replacing service for components and consumables
    CAT after-sales service always together wherever there is a dust collector.

One-stop ServiceAir Environmental
Comprehensive Solution

Formally registered for air environmental engineering and measurement agency
We have expert technician as air environmental professional engineer who completed the curriculum of Korea Occupational Safety and Health Agency .
  • Dust collection equipment design and production
  • +
  • Environmental permits and paperwork of the hazard prevention plan
  • +
  • Measurement of air pollutants in discharge facilities
  • Agency/Sales office

    Agency/Sales office

  • Location

    Location

Online Estimate