Call +82-31-1577 - 8898

Clean Air Tech

Search

Sitemap

Dust

Model CRC
Use Removal of indoor scattered dust
Filter type Pre-filter, HEPA filter, Carbon filter
Filter cleaning method Filter replacing type

Introduction

CRC-Series whole ventilating dust collector is to remove dust without additional hood installation.
It is usually used in the place that the local ventilation system is hard to be installed.


CRC-정면(0).png

Features

  • Multi-step filter design
    Step 1, Pre-filter: Large size dust is collected by polyester pre-filter.
    Step 2. CFM filter: Small size particles and dust mixed with water or oil are filtered
    by CFM filter made of glass fiber.
    Step 3. Carbon filter: VOCs are removed by adsorption of activated carbon.
  • Whole ventilation
    It can be used in the place that the local ventilation system is hard to be installed.

Specification

Model Max. Air Flow
(CMM)		 Max. Pressure
(mmAq)		 Motor
(Kw)		 Dimension Area
(m2)		 Weight
(Kg)
A B C
CRC-50 17 29 0.15 550 500 1,050 33 ~ 66 72
CRC-100 38 32 0.2 700 700 1,370 66 ~ 122 160
CRC-200 57 43 0.3 800 750 1,630 122 ~ 158 185
CRC-300 76 32 0.2x2 1,500 700 1,370 158 ~ 211 274

※ Without the height of caster



Installation case

View all installation examples

The Right service of Clean air Tech begins

with hope to contribute to the neighbors and society through the clean environment.
Our passion does not end by the accurate and detailed design, precise production, excellent quality and best performance through the installation and construction.
It is the spirit of fulfilling responsibility to dust collectors operated all around industrial sites as the air environment specialized company.
We, the whole member of Clean air tech believe that this is customer-centric right service.

CAT RIGHT SERVICE

  • Diagnosing service for dust collector performance and efficiency
    CAT provides right use, performance maintenance, diagnosing service for every dust collecting facilities.

  • Round visiting check-up
    We believe that all dust collectors should contribute to the improvement of working condition.

  • Repairing and replacing service for components and consumables
    CAT after-sales service always together wherever there is a dust collector.

One-stop ServiceAir Environmental
Comprehensive Solution

Formally registered for air environmental engineering and measurement agency
We have expert technician as air environmental professional engineer who completed the curriculum of Korea Occupational Safety and Health Agency .
  • Dust collection equipment design and production
  • +
  • Environmental permits and paperwork of the hazard prevention plan
  • +
  • Measurement of air pollutants in discharge facilities
  • Agency/Sales office

    Agency/Sales office

  • Location

    Location

Online Estimate